There are many ways to Wire A 4 Channel amp To 6 Speakers, to get better quality results. When more speakers attach to a low capacity channel it increases its load. So, we have two ways of connection which are given:
Series Connection and Parallel Connection
Wiring a 4 channel amplifier in 6 speakers can be possible in both series and parallel combinations.
If you want to Wire A 4 Channel amp To 6 Speakers, In a series connection, the speakers are attached to different channels and it is easy to handle as the wiring adjusts easily. They also increase the resistance of the circuit and there is one path that exists for the flow of current. If one connection is burnt the whole connection is affected. Now, look at the working of series connection is given in the following steps:
In the 1st step, speakers 1 & 2 go to channel 1, and the -ve terminal of channel 1 connected to the -ve wire of speaker 1. Then connect the positive wire of speaker to +ve wire of speaker 2. Then connect the +ve wires of both speakers to the +ve terminal of channel 1.
In the 2nd step, speakers 3 & 4 go to channel 2 of the amplifier. And works as same step 1.
In the 3rd step, speakers 5 & 6 go to channels 3 and 4 of the amplifier.
However, it depends on your personal choice to change the setup according to your requirement.
In parallel connections, the resistance of the circuit decreases, and more than one path exists for the flow of current. And there is no effect on the connection if any component burns in the circuit. Now, look at the working of parallel connection is given in the following steps:
In step 1, the -ve wires of speakers 1 & 2 are attached and +ve wires of the speakers also attach with others and then connected with the terminals of channel 1.
The same step is revised for speakers 3 & 4 and connected to channel 2 of the amplifier.
And the remaining wires 5 & 6 speakers are attached to channels 3 & 4 in the amplifier.
It is the choice of the user which connection they will adopt for better sound quality results. It is better to connect the speakers in parallel combination and put the sound normal it will not break the stereo and you will get the best quality sound. While the series connection is safe as it has low power for the speaker and will not get the best quality sound at the end. So, In this way you can Wire A 4 Channel amp To 6 Speakers.
4 Channel Amplifier
4 channel amplifier has 4 different output channels. And they are used to running both speakers and subwoofers. 4 channel amplifier tends to a versatile type of amplifier. A 4 channel amplifier is worth buying from 4 speakers. In 4 channel amplifier, we should focus on the following features of Wire A 4 Channel amp To 6 Speakers:
In channel 1, A is +ve and B is -ve.
In channel 2, C is +ve and D is -ve.
In channel 3, E is +ve and F is -ve.
In channel 4, G is +ve and H is -ve.